Glossary of Terms - Exterior Doors
What are the individual elements of the entrance door called? What do the mysterious terms related to parameters and technical description mean?
Window frame (also known as the casing) - A structural element of the window embedded in the wall, which permanently connects it to the window opening. One or more wings are attached to the frame via hinges.
Window sash - The openable part of the window. It is equipped with a handle that enables operation and control of the sash. The sash, depending on the hardware used, can be tiltable, tiltable, or tilt and turn.
Window seals - Elements that ensure the tightness of windows. As standard, there are two types of gaskets installed in the windows: glazing and retaining gaskets (known as bumpers or notches). Both prevent the water from getting inside the window profile and prevent the hardware from rusting. The thrust seals also act as a barrier against wind, dust, and noise. There are always two glazing gaskets, one from the outside and the other from the inside of the window. Their flexibility and resistance to changing weather conditions is ensured by the material they are made of, i.e., EPDM or TPS.
Heat transfer coefficient A value that tells you how much heat is lost per square meter of surface (windows and doors) in one hour, if the outside air temperature is one degree lower than in the room.
We denote the heat transfer coefficient by the symbol U [W / m2K]. The lower its value, the better the low heat transfer coefficient, meaning the windows and doors have good thermal insulation properties and guarantee the reduction of heat loss.
Acoustic insulation - The degree of attenuation of noise coming from outside the building, which is determined by the Rw (dB) coefficient. The higher the coefficient value, the better protection the window provides against noise. The value is influenced by several elements: window tightness, their dimensions, acoustic insulation of glass inserts, and the profile structure.
RC (resistance classes) - A six level scale that defines the class level of anti-burglary protection for windows and doors. In a single-family home, the most commonly used products are in classes RC2\RC3. The PN-EN 1627 standard provides six classes of burglary resistance for building openings, like windows and doors. Certificates confirming increased resistance to burglary are issued by certification bodies operating in the field of conformity assessment, which have active accreditation for this scope of tests.
PVC window profile class and the number of chambers - Classes of profiles differ in terms of the thickness of the profile walls and are determined in accordance with applicable standards. The class of window profiles mainly affects the window profile’s stiffness and the load-bearing capacity of the welded corners of the window profiles. The window profile itself consists of chambers whose task it is to improve the thermal properties of windows. Nowadays, five chambers seem to be a standard, which one should not go below in order to keep the window thermal insulation at a satisfactory level.
Class A profiles - The minimum thickness of the visible wall is greater than or equal to 2.8 mm, and the minimum thickness of the invisible wall is greater than or equal to 2.5 mm. This solution provides greater stability of the window, better thermal insulation properties and with the use of appropriate glazing, effective protection against external noise.
Class B profiles - The minimum thickness of the visible wall is more than 2.5 mm, and the minimum thickness of the invisible wall is 2 mm (Class C includes profiles for which the minimum thickness of the visible and invisible wall has not been defined). A window with a profile classified as class A will therefore be more rigid and stable than class B and C windows.
Fittings- Window elements that maintain tightness and open, close, and tilt window or door sashes. Fittings are also responsible for security and protecting against burglary. One of their key hardware components is the handle because it is used to change the position of the sash. Today, the most common window fittings are perimeter fittings and they are located around the perimeter of the sash. When closed, they press the sash evenly against the frame, which ensures tightness and prevents profile deformation. What kind of envelope fittings we choose depends on how our windows will open. We can choose from hinged windows, which allow you to open the window, and tilt, which allows only to tilt the sash. The most convenient solution is fittings that combine both functions.
Micro- ventilation - A function provided by appropriate fittings, which give the possibility of incomplete closing of the window sash. When using this opening variant the sash does not come into close contact with the frame and a gap of several millimeters is created between them. This allows air to circulate while at the same time protecting the leaf against an opening in the event of a strong gust of wind.
Fixed post / Mobile post - The post is an element of the window structure that separates its sections. Depending on the window's structural capabilities or investors' preferences, it can be in a fixed version or the so-called moving. The fixed post is an element permanently connected to the window frame and makes the structure more resistant to strong wind or burglary attempts. In such a solution, each sash works independently, which allows the use of a tilt and turn mechanism in both sashes (with double sash windows).
In a movable post, elements of the window structure are not permanently connected to the frame of the sash and the post is created by overlapping the rebate parts of the sashes. With this option, only one handle is used and opening the second sash requires unlocking the catches inside the sash frame and after opening the first one sash. An advantage of the movable mullion is the opening clearance is not limited by the vertical mullion. It is almost always used for balcony doors.
Glazing package - A standard solution in the field of glazing windows and doors. Currently, the standard is the use of double or triple glazing, separated by a spacer and filled with noble gases. The space between two panes separated by a spacer is called a chamber. One, two or three-chamber glazing units are available on the market.
Spacer frame (inter-pane) - An element of the glazing unit sealing the edges of the glazing units and separating the panes from each other. Most often frames are made of aluminum since the high thermal conductivity allows heat to escape through the window. The frames are available in various colors and have different parameters, including a warm frame.
Safety glass - Glass that does not pose a risk of injury in the event of damage, but is not anti-burglary glass. After breaking the safety glass, it will break into blurred pieces or it will stay whole after being damaged
Muntin bars - Decorative, thin slats that divide the panes into fields. The most commonly used solutions are Viennese muntins, which are glued to the glass from the outside and the internal muntins, which are placed inside the insulating glass units.
What are the individual elements of the entrance door called? What do the mysterious terms related to parameters and technical description mean?
Dear guests, our website uses cookies. You can specify the conditions for storing or accessing cookies. For more information on cookies and other sensitive data, please see our Privacy Policy and GDPR.
If you have any questions about our cookie policy, please do not hesitate to contact us.